Subject: TJ170-179 Mechanics applied to machinery. Dynamics

2019

Anamagh, Mirmeysam Rafiei and Bediz, Bekir (2019) Three-dimensional dynamics of functionally graded and laminated doubly-curved composite structures having arbitrary geometries and boundary conditions. Composites Part B: Engineering, 172 . pp. 533-546. ISSN 1359-8368 (Print) 1879-1069 (Online)

Bediz, Bekir and Özdoğanlar, O. Burak (2019) Rotational dynamics of micro-scale cutting tools. (Accepted/In Press)

Rafiei Anamagh, Mirmeysam and Bediz, Bekir (2019) Three-dimensional vibration behavior of FGM doubly-curved laminated structures. In: International Modal Analysis Conference (IMAC), Orlando, Florida

2018

Bediz, Bediz (2018) A spectral-Tchebychev solution technique for determining vibrational behavior of thick plates having arbitrary geometry. Journal of Sound and Vibration, 432 . pp. 272-289. ISSN 0022-460X (Print) 1095-8568 (Online)

Bediz, Bekir (2018) Effects of the rotational speed on the dynamics of micro cutting tools. In: 18th International Conference on Machine Design and Production, Eskisehir, Turkey

Bediz, Bekir and Özdoğanlar, O. Burak (2018) Predicting the rotating tool-tip dynamics in mechanical micromachining using modal testing. In: International Congress on Machining (UTIS 2018), Antalya, Turkey

Mohammadi, Yaser and Azvar, Milad and Budak, Erhan (2018) Suppressing vibration modes of spindle-holder-tool assembly through FRF modification for enhanced chatter stability. CIRP Annals - Manufacturing Technology, 67 (1). pp. 397-400. ISSN 0007-8506 (Print) 1726-0604 (Online)

Tunç, Lütfi Taner (2018) Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 1891-1909. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Lütfi Taner and Mohammadi, Yaser and Budak, Erhan (2018) Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems. Mechanical Systems and Signal Processing, 111 . pp. 423-441. ISSN 0888-3270

Tunç, Lütfi Taner and Özşahin, Orkun (2018) Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes. Advances in Manufacturing . ISSN 2095-3127 (Print) 2195-3597 (Online) Published Online First http://dx.doi.org/10.1007%2Fs40436-018-0233-x

2017

Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan (2017) Development of turn-milling machine tool program parameters based on basic cutting geometry. In: 8th International Symposium on Machining, Antalya, Turkey

Rahmat, Amin and Koç, Bahattin and Yıldız, Mehmet (2017) A systematic study on numerical simulation of electrified jet printing. Additive Manufacturing . ISSN 2214-7810 (Print) 2214-8604 (Online) Published Online First http://dx.doi.org/10.1016/j.addma.2017.08.004

2014

Altıntaş, Y. and Kersting, P. and Biermann, D. and Budak, Erhan and Denkena, B. and Lazoğlu, I. (2014) Virtual process systems for part machining operations. CIRP Annals - Manufacturing Technology, 63 (2). pp. 585-605. ISSN 0007-8506 (Print) 1726-0604 (Online)

Baytok, Esma and Özlü, Emre and Budak, Erhan (2014) Titanyum ve alaşımlarının yüksek performanslı işlenmesi (High performance machining of titanium and its alloys). In: 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye

2010

Kunt, Emrah Deniz and Khalil, Islam S.M. and Naskali, Ahmet Teoman and Fidan, Kaan Can and Sabanovic, Asif (2010) Yüksek hassasiyetli montaj işlemleri için minyatür delta robot tasarımı, en iyilemesi ve denetimi. In: Otomatik Kontrol Ulusal Toplantısı 2010 (TOK'2010), Gebze, Kocaeli