title   
  

Creator/Author/Editor: Tunç, Lütfi Taner

2018

Tunç, Lütfi Taner and Mohammadi, Yaser and Budak, Erhan (2018) Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems. Mechanical Systems and Signal Processing, 111 . pp. 423-441. ISSN 0888-3270

Tunç, Lütfi Taner and Özşahin, Orkun (2018) Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes. Advances in Manufacturing . ISSN 2095-3127 (Print) 2195-3597 (Online) Published Online First http://dx.doi.org/10.1007%2Fs40436-018-0233-x

Vrabic, Rok and Kozjek, Dominik and Öztürk, Erdem and Tunç, Lütfi Taner and Malus, Andreja and Butala, Peter (2018) Identification of the CIRP expertise network based on public data. In: 51st CIRP Conference on Manufacturing Systems, Stockholm, Sweden

Tunç, Lütfi Taner (2018) Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 1891-1909. ISSN 0268-3768 (Print) 1433-3015 (Online)

Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2018) Tool axis optimization for robotic 5-axis milling considering kinematics. In: 14th Conference on High Speed Machining Conference, San Sebastian (Accepted/In Press)

2017

Tunç, Lütfi Taner and Sapmaz, Ömer Faruk (2017) Challenges for industrial robots towards milling applications. In: 8th International Symposium on Machining (UTIS 2017), Antalya, Turkey

2016

Özkırımlı, Ömer Mehmet and Tunç, Lütfi Taner and Budak, Erhan (2016) Generalized model for dynamics and stability of multi-axis milling with complex tool geometries. Journal of Materials Processing Technology, 238 . pp. 446-458. ISSN 0924-0136 (Print) 1873-4774 (Online)

Tunç, Lütfi Taner (2016) Rapid extraction of machined surface data through inverse geometrical solution of tool path information. International Journal of Advanced Manufacturing Technology, 87 (1-4). pp. 353-362. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Lütfi Taner and Budak, Erhan and Bilgen, Samet and Zatarain, Mikel (2016) Process simulation integrated tool axis selection for 5-axis tool path generation. CIRP Annals - Manufacturing Technology, 65 (1). pp. 381-384. ISSN 0007-8506 (Print) 1726-0604 (Online)

2015

Tunç, Lütfi Taner and Özkırımlı, Ömer Mehmet and Budak, Erhan (2015) Generalized cutting force model in multi-axis milling using a new engagement boundary determination approach. International Journal of Advanced Manufacturing Technology, 77 (1-4). pp. 341-355. ISSN 0268-3768 (Print) 1433-3015 (Online)

2013

Tunç, Lütfi Taner and Budak, Erhan (2013) Identification and modeling of process damping in milling. Journal of Manufacturing Science and Engineering, 135 (2). ISSN 1087-1357

2012

Tunç, Lütfi Taner and Budak, Erhan (2012) Effect of cutting conditions and tool geometry on process damping in machining. International Journal of Machine Tools and Manufacture, 57 . pp. 10-19. ISSN 0890-6955

Özlü, Emre and Tunç, Lütfi Taner and Güven, İpek and Budak, Erhan (2012) Industrial applications of science integrated machining approach. In: 15. Uluslararası Makina Tasarım ve İmalat Kongresi (UMTİK 2012), Pamukkale, Denizli, Turkey

Budak, Erhan and Tunç, Lütfi Taner and Alan, Salih and Özgüven, H. Nevzat (2012) Prediction of workpiece dynamics and its effects on chatter stability in milling. CIRP Annals - Manufacturing Technology, 61 (1). pp. 339-342. ISSN 0007-8506

2011

Tunç, Lütfi Taner and Budak, Erhan (2011) Effect of cutting conditions and tool geometry on process damping in machining. In: 4th International Conference on Manufacturing Engineering (ICMEN2011), Thessaloniki, Greece

Öztürk, Erdem and Tunç, Lütfi Taner and Budak, Erhan (2011) Analytical methods for increased productivity in five-axis ball-end milling. International Journal of Mechatronics and Manufacturing Systems (IJMMS), 4 (3/4). pp. 238-265. ISSN 1753-1039 (print) ; 1753-1047 (online)

2010

Budak, Erhan and Tunç, Lütfi Taner (2010) Identification and modeling of process damping in turning and milling using a new approach. CIRP Annals - Manufacturing Technology, 59 (1). pp. 403-408. ISSN 0007-8506

Tunç, Lütfi Taner (2010) Selection of cutting strategy and parameters in multi-axis machining operations for improved productivity. [Thesis]

This list was generated on Sun Dec 16 21:19:19 2018 +03.