title   
  

Creator/Author/Editor: Khalili Sadaghiani, Abdolali

2018

Karimzadehkhouei, Mehrdad and Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Akgönül, Sarp and Özbey, Arzu and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2018) Experimental and numerical investigation of inlet temperature effect on convective heat transfer of γ-Al2O3/water nanofluid flows in microtubes. Heat Transfer Engineering . ISSN 0145-7632 (Print) 1521-0537 (Online) Published Online First http://dx.doi.org/10.1080/01457632.2018.1442305

Karimzadehkhouei, Mehrdad and Shojaeian, Mostafa and Khalili Sadaghiani, Abdolali and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2018) Entropy generation analysis of laminar flows of water-based nanofluids in horizontal minitubes under constant heat flux conditions. (Accepted/In Press)

Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Kasap, Sibel and Kaya, İsmet İnönü and Koşar, Ali (2018) Foamlike 3D graphene coatings for cooling systems involving phase change. ACS Omega, 3 (3). pp. 2804-2811. ISSN 2470-1343

Ghorbani, Morteza and Khalili Sadaghiani, Abdolali and Villanueva, Guillermo L. and Koşar, Ali (2018) Hydrodynamic cavitation in microfluidic devices with roughened surfaces. (Accepted/In Press)

Taheri, M. H. and Mohammadpourfard, Mousa and Khalili Sadaghiani, Abdolali and Koşar, Ali (2018) Wettability alterations and magnetic field effects on the nucleation of magnetic nanofluids: a molecular dynamics simulation. (Accepted/In Press)

Ghorbani, Morteza and Alcan, Gökhan and Khalili Sadaghiani, Abdolali and Mohammadi, Ali and Ünel, Mustafa and Gözüaçık, Devrim and Koşar, Ali (2018) Characterization and pressure drop correlation for sprays under the effect of micro scale cavitation. Experimental Thermal and Fluid Science, 91 . pp. 89-102. ISSN 0894-1777 (Print) 1879-2286 (Online)

Khalili Sadaghiani, Abdolali and Koşar, Ali (2018) Numerical investigations on the effect of fin shape and surface roughness on hydrothermal characteristics of slip flows in microchannels with pin fins. International Journal of Thermal Sciences, 124 . pp. 375-386. ISSN 1290-0729 (Print) 1778-4166 (Online)

2017

Khalili Sadaghiani, Abdolali and Saadi, Nazwat S. and Semsari Parapari, Sorour and Karabacak, Tansel and Keskinöz, Mehmet and Koşar, Ali (2017) Boiling heat transfer performance enhancement using micro and nano structured surfaces for high heat flux electronics cooling systems. Applied Thermal Engineering, 127 . pp. 484-498. ISSN 1359-4311 (Print) 1873-5606 (Online)

Motezakker, Ahmad Reza and Khalili Sadaghiani, Abdolali and Akkoç, Yunus and Semsari Parapari, Sorour and Gözüaçık, Devrim and Koşar, Ali (2017) Surface modifications for phase change cooling applications via crenarchaeon Sulfolobus solfataricus P2 bio-coatings. Scientific Reports, 7 . ISSN 2045-2322

Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Özpınar, Alsan Volkan and Özaydın İnce, Gözde and Koşar, Ali (2017) Pool boiling heat transfer characteristics of inclined pHEMA-coated surfaces. Journal of Heat Transfer, 139 (11). ISSN 0022-1481 (Print) 1528-8943 (Online) Published Online First http://dx.doi.org/10.1115/1.4036651

Khalili Sadaghiani, Abdolali and Motezakker, Ahmad Reza and Koşar, Ali (2017) Experimental studies on steam condensation in horizontal and vertical microtubes. In: 13th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2017), Portoroz, Slovenia

Khalili Sadaghiani, Abdolali and Koşar, Ali (2017) Experimental study on subcooled flow boiling in horizontal microtubes and effect of heated length. Heat Transfer Engineering (SI), 38 (3). pp. 313-322. ISSN 0145-7632 (Print) 1521-0537 (Online)

Ghorbani, Morteza and Khalili Sadaghiani, Abdolali and Yıldız, Mehmet and Koşar, Ali (2017) Experimental and numerical investigations on spray structure under the effect of cavitation phenomenon in a microchannel. Journal of Mechanical Science and Technology, 31 (1). pp. 235-247. ISSN 1738-494X (Print) 1976-3824 (Online)

2016

Khalili Sadaghiani, Abdolali and Yıldız, Mehmet and Koşar, Ali (2016) Numerical modeling of convective heat transfer of thermally developing nanofluid flows in a horizontal microtube. International Journal of Thermal Sciences, 109 . pp. 54-69. ISSN 1290-0729 (Print) 1778-4166 (Online)

Şişman, Yağmur and Khalili Sadaghiani, Abdolali and Khedir, Khedir R. and Brozak, Matthew and Karabacak, Tansel and Koşar, Ali (2016) Subcooled flow boiling over microstructured plates in rectangular minichannels. Nanoscale and Microscale Thermophysical Engineering, 20 (3-4). pp. 173-190. ISSN 1556-7265 (Print) 1556-7273 (Online)

Khalili Sadaghiani, Abdolali and Şişman, Yağmur and Özaydın İnce, Gözde and Koşar, Ali (2016) An experimental study on flow boiling characteristics of phema nano-coated surfaces in a microchannel. In: 5th ASME International Conference on Micro/Nanoscale Heat and Mass Transfer (MNHMT2016), Biopolis, Singapore

Karimzadehkhouei, Mehrdad and Khalili Sadaghiani, Abdolali and Şendur, Kürşat and Mengüç, M. Pınar and Koşar, Ali (2016) Experimental study on heat transfer of multi-walled carbon nanotubes/water nanofluids in horizontal microtubes. In: 5th ASME International Conference on Micro/Nanoscale Heat and Mass Transfer, Biopolis, Singapore

Şişman, Yağmur and Khalili Sadaghiani, Abdolali and Khedir, Ramazan and Karabacak, Tansel and Koşar, Ali (2016) Nucleate boiling heat transfer enhancement using nanostructured al-alloy plates. In: 5th ASME International Conference on Micro/Nanoscale Heat and Mass Transfer, Biopolis, Singapore

Khalili Sadaghiani, Abdolali and Koşar, Ali (2016) Numerical and experimental investigation on the effects of diameter and length on high mass flux subcooled flow boiling in horizontal microtubes. International Journal of Heat and Mass Transfer, 92 . pp. 824-837. ISSN 0017-9310 (Print) 1879-2189 (Online)

2015

Khalili Sadaghiani, Abdolali (2015) Numerical and experimental studies on multi-phase flows in microchannels. [Thesis]

2014

Khalili Sadaghiani, Abdolali and Koşar, Ali (2014) Numerical investigation of slip flow across micro/nano pin fins. In: ASME 2014 International Mechanical Engineering Congress & Exposition, Montreal, Canada

This list was generated on Tue Jul 17 23:53:35 2018 +03.