title   
  

Creator/Author/Editor: Golubovic, Edin

2014

Zhakypov, Zhenishbek and Uzunovic, Tarik and Nergiz, Ahmet Özcan and Baran, Eray Abdurrahman and Golubovic, Edin and Şabanoviç, Asif (2014) Desktop microfactory for high precision assembly and machining. In: International Symposium on Industrial Electronics (ISIE 2014), Istanbul, Turkey

Uzunovic, Tarik and Golubovic, Edin and Şabanoviç, Asif (2014) FPGA based control of a walking piezo motor. In: IEEE 13th International Workshop on Advanced Motion Control (AMC 2014), Yokohama, Japan

2013

Uzunovic, Tarik and Golubovic, Edin and Baran, Eray Abdurrahman and Şabanoviç, Asif (2013) Configuration space control of a parallel delta robot with a neural network based inverse kinematics. In: 8th International Conference on Electrical and Electronics Engineering (ELECO 2013), Bursa, Turkey

Golubovic, Edin and Özsoy, Emre and Gökaşan, Metin and Şabanoviç, Asif (2013) Design and analysis of robust rotor current controller for doubly fed induction generator. In: 39th Annual Conference of the IEEE Industrial Electronics Society (IECON 2013), Vienna, Austria

Golubovic, Edin and Uzunovic, Tarik and Zhakypov, Zhenishbek and Şabanoviç, Asif (2013) Adaptive control of piezoelectric walker actuator. In: IEEE International Conference on Mechatronics (ICM 2013), Vicenza, Italy

Golubovic, Edin and Baran, Eray Abdurrahman and Şabanoviç, Asif (2013) Contouring controller for precise motion control systems. Automatika, 54 (1). pp. 19-27. ISSN 0005-1144

Baran, Eray Abdurrahman and Golubovic, Edin and Şabanoviç, Asif (2013) Functional observers for motion control systems. Automatika, 54 (2). pp. 231-241. ISSN 0005-1144

2012

Golubovic, Edin and Turşucular, Ali and Kurt, Tarık Edip and Şabanoviç, Asif (2012) Elektrik makineleri, güç elektroniği ve denetleme için eğitsel düzenek üretimi ve tasarımı. In: Otomatik Kontrol Ulusal Toplantısı (TOK 2012), Niğde

Zhakypov, Zhenishbek and Golubovic, Edin and Kurt, Tarık Edip and Şabanoviç, Asif (2012) Yürüyen piezoelektrik motorların sürülmesi. In: Otomatik Kontrol Ulusal Toplantısı (TOK 2012), Niğde

Golubovic, Edin and Shoukry Mohammed Khalil, Islam and Nergiz, Ahmet Özcan and Baran, Eray Abdurrahman and Şabanoviç, Asif (2012) Design and control of laser micromachining workstation. In: 12th IEEE International Workshop on Advanced Motion Control (AMC), Sarajevo, Bosnia and Herzegovina

2011

Khalil, Islam S. M. and Golubovic, Edin and Şabanoviç, Asif (2011) High precision motion control of parallel robots with imperfections and manufacturing tolerances. In: IEEE International Conference of Mechatronics (ICM 2011), Istanbul, Turkey

Khalil, Islam S. M. and Çelebi, Beşir and Çevik, Gülnihal and Golubovic, Edin and Mehmet, B. and Şabanoviç, Asif (2011) Optimal motion control and vibration suppression of flexible systems with inaccessible outputs. In: IEEE International Conference of Mechatronics (ICM 2011), Istanbul, Turkey

Golubovic, Edin (2011) Design and realization of laser micromachining system. [Thesis]

2010

Golubovic, Edin and Khalil, Islam S. M. and Kamadan, Abdullah and Şabanoviç, Asif (2010) Laser autofocusing: a sliding mode approach. In: 36th Annual Conference of the IEEE Industrial Electronics Society (IECON 2010), Phoenix, AZ, USA

This list was generated on Tue Oct 21 11:23:20 2014 EEST.