title   
  

Creator/Author/Editor: Budak, Erhan

2014

Yiğit, Ufuk and Ciğeroğlu, Ender and Budak, Erhan (2014) Chatter reduction in turning by using piezoelectric shunt circuits. In: IMAC-XXXI Conference and Exposition on Structural Dynamics, Orange County, California

Karagüzel, Umut and Olgun, Utku and Uysal, Emre and Budak, Erhan and Bakkal, Mustafa (2014) High performance turning of high temperature alloys on multi-tasking machine tools. In: 4th Machining Innovations Conference, Hannover

2013

Tunç, Lütfi Taner and Budak, Erhan (2013) Identification and modeling of process damping in milling. Journal of Manufacturing Science and Engineering, 135 (2). ISSN 1087-1357

Yasa, E. and Orhangül, A. and Songüler, S. C. and Platin, S. and Baytok, E. and Özlü, E. and Tunç, T. and Budak, Erhan (2013) Assessment of machinability performance in 5-axis milling of inconel 718 alloy with different carbide grades. In: 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya, Turkey

Çakır, Esin and Karagüzel, Umut and Olgun, Utku and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan (2013) Dik kesme durumunda kesme sıcaklığının analitik modellenmesi ve deneysel olarak doğrulanması (Modeling of temperature distribution in orthogonal cutting and experimental verfication). In: 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Kusadasi, Turkey

Baytok, Esma and Tuna, Başak and Toprak, Ayhan and Özlü, Emre and Budak, Erhan (2013) Freze ve delik delme işlemlerinde kullanılan karbür takımların sistematik olarak performans karşılaştırması (Performance comparison of milling and drilling carbide tools). In: 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Kusadasi, Turkey

Olgun, Utku and Budak, Erhan (2013) Machining of difficult-to-cut-alloys using rotary turning tools. In: 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Torino, Italy

Çelebi, Ceren and Özlü, E. and Budak, Erhan (2013) Modeling and experimental investigation of edge hone and flank contact effects in metal cutting. In: 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Torino, Italy

Çomak, A. and Koca, R. and Özkırımlı, Ö. M. and Budak, Erhan (2013) Modeling and simulation based design of variable pitch and variable helix milling tools for increased chatter stability. In: 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya, Turkey

Koca, Recep and Budak, Erhan (2013) Optimization of serrated end mills for reduced cutting energy and higher stability. In: 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Torino, Italy

Nizamoğulları, A. and Çomak, Alptunç and Budak, Erhan (2013) Paralel tornalama işlevini gerçekleştiren CNC torna tezgahının tasarımı, kesici uç ömrü ve kesme kararlılığı incelemeleri (Cutting tool life, cutting stability and process time review on designed and manufactured CNC turning machine which performs the parallel turning function). In: 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Kusadasi, Turkey

Aslan, Deniz and Budak, Erhan (2013) Satıh taşlama operasyonunda kuvvet ve sıcaklık modellemesi (Force and temperature modeling for surface grinding operation). In: 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Kusadasi, Turkey

Budak, Erhan and Çomak, Alptunç and Öztürk, Erdem (2013) Stability and high performance machining conditions in simultaneous milling. CIRP Annals - Manufacturing Technology, 62 (1). pp. 403-406. ISSN 0007-8506

Çomak, Alptunç and Koca, Recep and Özlü, Emre and Özşahin, Orkun and Öztürk, Erdem and Tunç, Taner and Uysal, Emre and Budak, Erhan and Özgüven, H. Nevzat (2013) Talaşlı imalat süreçlerinin kararlılığı ve takım tezgah dinamiği (Machining process stability and machine tool dynamics). In: 16. Ulusal Makina Teorisi Sempozyumu (UMTS 2013), Erzurum, Turkey

2012

Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan (2012) Process modeling of turn-milling using analytical approach. In: 3rd CIRP Conference on Process Machine Interactions (PMI), Nagoya, Japan

Çomak, Alptunç and Budak, Erhan (2012) Eşzamanlı frezeleme operasyonlarının dinamiği ve kararlılığı. In: 3. Ulusal Talaşlı İmalat Sempozyumu (UTIS 2012), Ankara, Türkiye

Budak, Erhan (2012) Suppression of chatter vibrations in simultaneous machining operations. In: 15th International Machine Tool Engineers' Conference (IMEC), Tokyo, Japan

Budak, Erhan (2012) Improving 5-axis milling operations using process models. In: 9th International Conference on Machine Tools, Automation, Technology and Robotics (MATAR 2012), Prag, Czech Republic

Özşahin, Orkun and Budak, Erhan and Özgüven, H. Nevzat (2012) Analytical modeling of the machine tool spindle dynamics under operational conditions. In: 37th International MATADOR Conference, Manchester, UK

Çomak, Alptunç and Budak, Erhan (2012) Chatter stability of parallel milling operations. In: 15. Uluslararası Makina Tasarım ve İmalat Kongresi (UMTİK 2012), Pamukkale, Denizli, Turkey

Tunç, Lütfi Taner and Budak, Erhan (2012) Effect of cutting conditions and tool geometry on process damping in machining. International Journal of Machine Tools and Manufacture, 57 . pp. 10-19. ISSN 0890-6955

Özlü, Emre and Tunç, Lütfi Taner and Güven, İpek and Budak, Erhan (2012) Industrial applications of science integrated machining approach. In: 15. Uluslararası Makina Tasarım ve İmalat Kongresi (UMTİK 2012), Pamukkale, Denizli, Turkey

Çakır, Esin and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan (2012) Modeling of temperature distribution in orthogonal cutting with dual-zone contact at rake face. In: 1st International Conference on Virtual Machining Process Technology (VMPT), Montreal, Canada

Budak, Erhan and Tunç, Lütfi Taner and Alan, Salih and Özgüven, H. Nevzat (2012) Prediction of workpiece dynamics and its effects on chatter stability in milling. CIRP Annals - Manufacturing Technology, 61 (1). pp. 339-342. ISSN 0007-8506

2011

Tunç, Lütfi Taner and Budak, Erhan (2011) Effect of cutting conditions and tool geometry on process damping in machining. In: 4th International Conference on Manufacturing Engineering (ICMEN2011), Thessaloniki, Greece

Öztürk, Erdem and Tunç, Lütfi Taner and Budak, Erhan (2011) Analytical methods for increased productivity in five-axis ball-end milling. International Journal of Mechatronics and Manufacturing Systems (IJMMS), 4 (3/4). pp. 238-265. ISSN 1753-1039 (print) ; 1753-1047 (online)

Özkırımlı, Ömer M. and Tunç, Taner L. and Budak, Erhan (2011) Simulation of multi-axis machining processes using z-mapping technique. In: 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Ankara, Turkey

Özşahin, Orkun and Budak, Erhan and Özgüven, Nevzat H. (2011) Investigating dynamics of machine tool spindles under operational conditions. In: 13th CIRP Modeling of Machining Operations, Sintra, Portugal

Özelkan, Ertunga C. and Öztürk, Özkan and Budak, Erhan (2011) Identifying parameters of a broaching design using non-linear optimisation. International Journal of Modelling, Identification and Control (IJMIC), 12 (3). pp. 244-252. ISSN 1746-6172 (print) , 1746-6180 (online)

Özkırımlı, Ömer M. and Budak, Erhan (2011) Process simulation for five-axis machining for generalised milling tools. International Journal of Design Engineering, 3 (3). pp. 232-246. ISSN 1751-5874 (Print) 1751-5882 (Online)

Aran, Volkan and Budak, Erhan (2011) An experimental study on dynamics and stability of miniature end mills. In: 13th CIRP Conference on Modelling of Machining Operations, Sintra, Portugal

Budak, Erhan and Öztürk, E. (2011) Dynamics and stability of parallel turning operations. CIRP Annals - Manufacturing Technology, 60 (1). pp. 383-386. ISSN 0007-8506

2010

Tunç, Taner L. and Özkırımlı, Ömer Mehmet and Öztürk, Erdem and Murtezaoğlu, Yavuz and Budak, Erhan (2010) Machining strategy development in 5-axis milling operations using process models. In: 4th CIRP International Conference on High Performance Cutting (HPC 2010), Gifu, Japan

Öztürk, Erdem and Budak, Erhan (2010) Modeling dynamics of parallel turning operations. In: 4th CIRP International Conference on High Performance Cutting (HPC 2010), Gifu, Japan

Akçay, Recep and Memiş, Emre K. and Özlü, Emre and Budak, Erhan (2010) Havacılık sanayinde süreç optimizasyonu için kararlılık diyagramlarının kullanımı. In: 2. Ulusal Talaşlı İmalat Sempozyumu (UTIS 2010), Konya, Türkiye

Öztürk, Erdem and Budak, Erhan (2010) Tool orientation effects on the geometry of 5-axis ball-end milling. In: 36th International Matador Conference, Manchester, UK

Özkırımlı, Ömer Mehmet and Budak, Erhan (2010) Process simulation for 5-axis machining using generalized milling tool geometries. In: 14. Uluslararası Makina Tasarım ve İmalat Kongresi (UMTİK 2010), Güzelyurt, North Cyprus

Özlü, Emre and Molinari, Alain and Budak, Erhan (2010) Two-zone analytical contact model applied to orthogonal cutting. Machining Science and Technology, 14 (3). pp. 323-343. ISSN 1091-0344 (print) 1532-2483 (online)

Akçay, Recep and Memiş, Emre K. and Özlü, Emre and Budak, Erhan (2010) Increasing productivity in high speed milling of airframe components using chatter stability diagrams. In: 2nd International CIRP Conference on Process Machine Interactions (PMI 2010), Vancouver, Canada

Öztürk, Erdem and Budak, Erhan (2010) Modeling dynamics of parallel milling processes in time-domain. In: 2nd International CIRP Conference on Process Machine Interactions (PMI 2010), Vancouver, Canada

Özlü, Emre and Engin, Şerafettin and Cook, Cristina and El-Wardany, Tahany and Budak, Erhan (2010) Simulation of broaching operations for tool design optimization. In: 2nd International CIRP Conference on Process Machine Interactions (PMI 2010), Vancouver, Canada

Özşahin, Orkun and Özgüven, H. Nevzat and Budak, Erhan (2010) Analysis and compensation of mass loading effect of accelerometers on tool point FRF measurements for chatter stability predictions. International Journal of Machine Tools and Manufacture, 50 (6). pp. 585-589. ISSN 0890-6955

Alan, Salih and Budak, Erhan and Özgüven, H. Nevzat (2010) Analytical prediction of part dynamics for machining stability analysis. International Journal of Automation Technology , 4 (3). pp. 259-267. ISSN 1881-7629 (Print) 1883-8022 (Online)

Öztürk, Erdem and Budak, Erhan (2010) Dynamics and stability of five-axis ball-end milling. Transactions of the ASME Journal of Manufacturing Science and Engineering, 132 (2). ISSN 1087-1357

Budak, Erhan and Tunç, Lütfi Taner (2010) Identification and modeling of process damping in turning and milling using a new approach. CIRP Annals - Manufacturing Technology, 59 (1). pp. 403-408. ISSN 0007-8506

2009

Öztürk, Erdem and Tunç, Taner L. and Budak, Erhan (2009) Investigation of lead and tilt angle effects in 5-axis ball-end milling processes. International Journal of Machine Tools and Manufacture, 49 (14). pp. 1053-1062. ISSN 0890-6955

Budak, Erhan and Tunç, Taner L. (2009) A new method for identification and modeling of process damping in machining. Journal of Manufacturing Science and Engineering - Transactions of ASME, 131 (5). ISSN 1087-1357

Özlü, Emre and Budak, Erhan and Molinari, A. (2009) Analytical and experimental investigation of rake contact and friction behavior in metal cutting. International Journal of Machine Tools and Manufacture, 49 (11). pp. 865-875. ISSN 0890-6955

Tunç, Taner L. and Budak, Erhan (2009) Extraction of 5-axis milling conditions from CAM data for process simulation. International Journal of Advanced Manufacturing Technology, 43 (5-6). pp. 538-550. ISSN 0268-3768 (Print) 1433-3015 (Online)

Öztürk, Erdem and Özkırımlı, Ömer Mehmet and Süren, Gökhan and Budak, Erhan and Aksu, B. (2009) Increasing productivity in die machining through process modelling. In: 5th International Conference and Exhibition on Design And Production of Machines And Dies/Molds, Kuşadası, Aydın, Türkiye

Özşahin, Orkun and Ertürk, Alper and Özgüven, H. Nevzat and Budak, Erhan (2009) A closed-form approach for identification of dynamical contact parameters in spindle-holder-tool assemblies. International Journal of Machine Tools and Manufacture, 49 (1). pp. 25-35. ISSN 0890-6955

Budak, Erhan (2009) Dynamic analysis and control. In: Cheng, Kai, (ed.) Machining Dynamics: Fundamentals, Applications and Practices. Springer Series in Advanced Manufacturing. Springer, London, England, pp. 21-84. ISBN 978-1-84628-368-0 (Online) 978-1-84628-367-3 (Print)

Kayhan, Mehmet and Budak, Erhan (2009) An experimental investigation of chatter effects on tool life. Proceedings of the Institution of Mechanical Engineers. Part B; Journal of Engineering Manufacture, 223 (11). pp. 1455-1463. ISSN 0954-4054 (Print) 2041-2975 (Online)

Budak, Erhan (2009) Machining Dynamics. In: Cheng , Kai, (ed.) Machining Dynamics. Springer, -. (Accepted/In Press)

Özşahin, Orkun and Özgüven, H. Nevzat and Budak, Erhan (2009) Mass loading effect of accelerometers on tool point FRF and stability diagrams. In: 12th CIRP Conference on Modeling and Machining Operations, San Sebastion, Spain

Budak, Erhan and Öztürk, Erdem and Tunç, Taner L. (2009) Modeling and simulation of 5-axis milling processes. CIRP Annals - Manufacturing Technology, 58 (1). pp. 347-350. ISSN 0007-8506

Özlü, Emre and Budak, Erhan (2009) Process modeling of orthogonal cutting with hone radiused tools. In: 12th CIRP Conference on Modeling and Machining Operations, San Sebastion, Spain

2008

Budak, Erhan and Tunç, Taner L. (2008) A new method for identification and modeling of process damping in machining. In: First International Conference on Process Machine Interactions, Hannover, Germany

Aksu, Burak and Özlü, Emre and Budak, Erhan (2008) Analysis and modeling of edge forces in orthogonal cutting. In: International Conference on Manufacturing Engineering, Kassandra, Greece

Budak, Erhan and Özlü, Emre (2008) Development of a thermomechanical cutting process model for machining process simulations. CIRP Annals - Manufacturing Technology, 57 (1). pp. 97-100. ISSN 0007-8506

2007

Çimren, Emrah and Çatay, Bülent and Budak, Erhan (2007) Development of a machine tool selection system using AHP. The International Journal of Advanced Manufacturing Technology, 35 (3-4). pp. 363-376. ISSN 0268-3768

Budak, Erhan and Çatay, Bülent and Tekin, İbrahim and Yenigün, Hüsnü and Abbak, Mehmet and Drannikov, Sergey and Şimşek, Oya (2007) Design of an RFID-based manufacturing monitoring and analysis system. In: RFID Eurasia, Istanbul, Turkey

Budak, Erhan and Çatay, Bülent and Tekin, İbrahim and Yenigün, Hüsnü and Abbak, Mehmet and Drannikov, Sergey (2007) Microstrip patch antenna for RFID applications. In: RFID Eurasia, Istanbul

Özlü, Emre and Budak, Erhan (2007) Analytical modeling of chatter stability in turning and boring operations - part I: model development. Journal of Manufacturing Science and Engineering, 129 (4). pp. 726-732. ISSN 1087-1357

Özlü, Emre and Budak, Erhan (2007) Analytical modeling of chatter stability in turning and boring operations - Part II: Experimental verification. Journal of manufacturing science and engineering, 129 (4). pp. 733-739. ISSN 1087-1357

Budak, Erhan (2007) Machining stability and machine tool dynamics. In: 11th International Research/Expert Conference " Trends in the Development of the Machinery and Associated Technology", Hammamet, Tunisa

Öztürk, Erdem and Özlü, Emre and Budak, Erhan (2007) Modeling dynamics and stability of 5-axis milling processes. In: 10th CIRP INternational Workshop on Modeling of Machining OPerations, Calabria, Italy

Tunc, Taner and Budak, Erhan (2007) Optimization of 5-Axis milling processes based on the process models with application to airfoil machining. In: 10th CIRP International Workshop on Modeling of Machining OPerations, Calabria, Italy

Özlü, Emre and Budak, Erhan and Molinari, Alain (2007) Thermomechanical modeling of orthogonal cutting including the effect of stick-slide regions on the rake face. In: 10th CIRP INternational Workshop on Modeling of Machining OPerations, Calabria, Italy

Öztürk, Erdem and Budak, Erhan (2007) Modeling of 5-axis milling processes. Machining science and technology, 11 (3). pp. 287-311. ISSN 1091-0344 print / 1532-2483 online

Ertürk, Alper and Budak, Erhan and Özgüven, H. Nevzat (2007) Selection of design and operational parameters in spindle-holder-tool assemblies for maximum chatter stability by using a new analytical model. International journal of machine tools & manufacture, 47 (9). pp. 1401-1409. ISSN 0890-6955

Özlü, Emre and Budak, Erhan (2007) Experimental analysis and modeling of orthogonal cutting using material and friction models. In: 4th International Conference and Exhibition on Machines and Design and Production of Dies and Molds, Cesme, Izmir, Turkey

Ertürk, A. and Özgüven, H. N. and Budak, Erhan (2007) Effect analysis of bearing and interface dynamics on tool point FRF for chatter stability in machine tools by using a new analytical model for spindle-tool assemblies. International journal of machine tools & manufacture, 47 (1). pp. 23-32. ISSN 0890-6955

Özelkan, Ertunga and Öztürk, Özkan and Budak, Erhan (2007) Optimization of broaching design. In: 2007 Industrial Engineering Research Conference,

2006

Ertürk, A. and Özgüven, H. N. and Budak, Erhan (2006) Analytical modeling of spindle-tool dynamics on machine tools using Timoshenko beam model and receptance coupling for the prediction of tool point FRF. International Journal of Machine Tools and Manufacture, 46 (15). pp. 1901-1912. ISSN 08906955

Budak, Erhan (2006) Analytical models for high performance milling. Part I: cutting forces, structural deformations and tolerance integrity. International journal of machine tools & manufacture, 46 (12-13). pp. 1478-1488. ISSN 0890-6955

Budak, Erhan (2006) Analytical models for high performance milling. Part II: process dynamics and stability. International journal of machine tools & manufacture, 46 (12-13). pp. 1489-1499. ISSN 0890-6955

Özlü, Emre and Budak, Erhan (2006) Analytical stability models for turning and boring operations. In: 2nd International Conference on High Speed Cutting, Vancouver, Canada

Özlü, Emre and Budak, Erhan (2006) Analytical prediction of stability limit in turning operations. In: CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia

Tunç, L. Taner and Budak, Erhan and Öztürk, Erdinç (2006) Optimization of 5-axis milling processes using process models. In: 9th CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia

Tunç, L. Taner and Budak, Erhan (2006) 5 eksen frezeleme süreçlerinin modelleme yoluyla benzetimi ve eniyilenmesi. In: TIMAK Conference, Balikesir, Turkey

Öztürk, Erdem and Budak, Erhan (2006) 5 eksen frezelemede kuvvet ve şekil hatalarının modellenmesi. In: TIMAK Conference, Balıkesir, Turkey

Özlü, Emre and Budak, Erhan (2006) Tornalama işlemlerinde süreç kararlılığının analitik olarak modellenmesi. In: TİMAK Kongresi, Istanbul, Turkey

Budak, Erhan and Ertürk, A. and Özgüven, H. N. (2006) A Modeling approach for analysis and improvement of spindle-holder-tool assembly dynamics. CIRP Annals - Manufacturing Technology, 55 (1). pp. 369-372. ISSN 0007-8506

Ertürk, Alper and Özgüven, H. Nevzat and Budak, Erhan (2006) İşleme merkezlerinin dinamik analizi ve süreçte kararlılık: yeni bir analitik modelin uygulamaları. Makina Tasarım ve İmalat Dergisi, 8 (2). pp. 55-66. ISSN 1302-9487

2005

Budak, Erhan and Tekeli, Erkin (2005) Maximizing chatter free material removal rate in milling through optimal selection of axial and radial depth of cut pairs. In: 55th General Assembly of CIRP, Antalya, Turkey

Tekeli, Alper and Budak, Erhan (2005) Maximization of chatter-free material removal rate in end milling using analytical methods. Machining science and technology, 9 (2). pp. 147-167. ISSN 1091-0344 print / 1532-2483 online

Öztürk, Erdem and Budak, Erhan (2005) Modeling of 5-axis forces. In: Proceedings of the 8th International Workshop on Modeling of Machining Operations, Chemnitz, Germany

2004

Budak, Erhan (2004) High performance milling. In: Aerotrends 2004 Conference, Bilbao, Spain

Budak, Erhan and Lazoğlu, İsmail and Güzel, Birhan U. (2004) Improving cycle time in sculptured surface machining through force modeling. CIRP Annals - Manufacturing Technology, 53 (1). pp. 103-106. ISSN 0007-8506

Kayhan, Mehmet and Budak, Erhan (2004) Investigating effects of chatter vibrations on tool wear in turning. In: 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Sorrento, Italy

Köktürk, Utku and Budak, Erhan (2004) Optimization of broaching tool geometry. In: International Seminar on Intelligent Computation i, Sorrento, Italy

Kıvanç, Evren Burcu and Budak, Erhan (2004) Structural modeling of end mills for form error and stability analysis. International Journal of Machine Tools and Manufacture, 44 (11). pp. 1151-1161. ISSN 0890-6955

Çimren, Emrah and Çatay, Bülent and Budak, Erhan (2004) Development of a machine tool selection system using analytic hierarchy process. In: 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (CIRP ICME '04), Sorrento, Italy

Arslan, M. Çağdaş and Çatay, Bülent and Budak, Erhan (2004) A decision support system for machine selection. Journal of Manufacturing Technology Management, 15 (1). pp. 101-109. ISSN 1741-038X

Tekeli, Alper and Budak, Erhan (2004) Increasing chatter free material removal rate in die and mold machining. In: 7th International Symposium on Advances in Abrasive Technology, Bursa/Turkey

2003

Budak, Erhan (2003) An analytical design method for milling cutters with nonconstant pitch to increase stability, part 1: Theory. Journal of manufacturing science and engineering, 125 (1). pp. 29-34. ISSN 1087-1357

Budak, Erhan (2003) An analytical design method for milling cutters with nonconstant pitch to increase stability, part 2: Application. Journal of manufacturing science and engineering, 125 (1). pp. 35-38. ISSN 1087-1357

2001

Nemes, J. A. and Asamoah-Attiah, S. and Budak, Erhan (2001) Cutting load capacity of end mills with complex geometry. CIRP Annals - Manufacturing Technology, 50 (1). pp. 65-68. ISSN 0007-8506

Wiercigroch, Marian and Budak, Erhan (2001) Sources of nonlinearities, chatter generation and suppression in metal cutting. Philosophical transactions of the Royal Society of London series A - Mathematical physical and engineering sciences, 359 (1781). pp. 663-693. ISSN 1364-503X (print) 1471-2962 (online)

This list was generated on Fri Oct 31 06:58:49 2014 EET.