title   
  

Creator/Author/Editor: Akşit, Mahmut Faruk

2013

Evren, Sanem and Ünel, Mustafa and Akşit, Mahmut Faruk (2013) Modeling and control of a variable speed variable pitch angle prototype wind turbine. Mathematical and Computational Applications, 18 (3). pp. 408-420. ISSN 1300-686X

2012

Evren, Sanem and Ünel, Mustafa and Adak, Ömer Kemal and Erbatur, Kemalettin and Akşit, Mahmut Faruk (2012) Modeling and simulation of a horizontal axis wind turbine using S4WT. In: International Conference on Renewable Energy Research and Applications (ICRERA), Nagasaki, Japan

Evren, Sanem and Ünel, Mustafa and Adak, Ömer Kemal and Erbatur, Kemalettin and Akşit, Mahmut Faruk (2012) Prototip bir rüzgar türbininin S4WT ortamında modellenmesi, denetimi ve benzetimi. In: Otomatik Kontrol Ulusal Toplantısı 2012 (TOK'12), Niğde, Türkiye

Çetinsoy, Ertuğrul and Dikyar, Serhat and Hançer, Cevdet and Öner, Kaan Taha and Sırımoğlu, Efe and Ünel, Mustafa and Akşit, Mahmut Faruk (2012) Design and construction of a novel quad tilt-wing UAV. Mechatronics (Sl), 22 (6). pp. 723-745. ISSN 0957-4158

Coşkun, Mustafa Bulut and Aksoy, Serdar and Akşit, Mahmut Faruk (2012) Friction and wear characteristics of Haynes 25, 188, and 214 superalloys against Hastelloy X up to 540 °C. Tribology Letters, 45 (3). pp. 497-503. ISSN 1023-8883 (Print) ; 1573-2711 (Online)

Akşit, Mahmut Faruk and Duran, Ertuğrul Tolga (2012) Flow and thermal analysis of oil brush seals, and investigation of shear heating phenomenon. (Submitted)

Akşit, Mahmut Faruk and Aksoy, Serdar (2012) Brush seal dynamic stiffness behavior. (Submitted)

Öner, Kaan Taha and Çetinsoy, Ertuğrul and Sırımoğlu, Efe and Hançer, Cevdet and Ünel, Mustafa and Akşit, Mahmut Faruk and Gülez, Kayhan and Kandemir, İlyas (2012) Mathematical modeling and vertical flight control of a tilt-wing UAV. Turkish Journal of Electrical Engineering & Computer Sciences, 20 (1). pp. 149-157. ISSN 1300-0632

Aksoy, Serdar and Coşkun, Mustafa Bulut and Akşit, Mahmut Faruk (2012) A fully coupled 3D finite element analysis for a bump-type compliant foil bearing. In: The ASME/STLE 2011 International Joint Tribology Conference (IJTC2011), Los Angeles, California, USA

Coşkun, Mustafa Bulut and Aksoy, Serdar and Başaran, Necdet and Akşit, Mahmut Faruk (2012) Friction and wear characteristics of H25, H188, H214 against Hastelloy X. In: The ASME/STLE 2011 International Joint Tribology Conference (IJTC2011), Los Angeles, California, USA

2011

Akşit, Mahmut Faruk and Makaracı, Murat (2011) An overview of wind turbine manufacturing experience in Turkey. In: International 100% Renewable Energy Conference and Exhibition (IRENEC 2011), Istanbul, Turkey

Dogan, Hassan and Akşit, Mahmut Faruk (2011) Aerodynamic performance sensitivity analysis of blade design for a 100 kW HAWT. In: 10th International Conference on Sustainable Energy Technologies (SET2011), Istanbul, Turkey

Çevik, Gülnihal and Akşit, Mahmut Faruk and Şabanoviç, Asif (2011) Piezoelectric wind power harnessing – an overview. In: 10th International Conference on Sustainable Energy Technologies (SET2011), İstanbul, Turkey

Akşit, Mahmut Faruk (2011) Wind turbine manufacturing infrastructure in Turkey. The Energy Report, 2 (15). pp. 36-43. ISSN 1309-5269

Coşkun, Mustafa Bulut and Akşit, Mahmut Faruk (2011) A brief overview on high temperature friction and wear. In: STLE/ASME International Joint Tribology Conference, 2010 (IJTC2010), San Francisco, California, USA

Çetinsoy, Ertuğrul and Sırımoğlu, Efe and Öner, Kaan Taha and Hançer, Cevdet and Ünel, Mustafa and Akşit, Mahmut Faruk and Kandemir, İlyas and Gülez, Kayhan (2011) Design and development of a tilt-wing UAV. Turkish Journal of Electrical Engineering and Computer Sciences, 19 (5). pp. 733-741. ISSN 1300-0632

2010

Aksoy, Serdar and Akşit, Mahmut Faruk and Doğu, Yahya (2010) A simple fem model for foil bearings under differential pressure. In: STLE/ASME International Joint Tribology Conference, 2010 (IJTC2010), San Francisco, California, USA

Coşkun, Mustafa Bulut and Aksoy, Serdar and Akşit, Mahmut Faruk (2010) Ultra high temperature linear reciprocating tribometer. In: ASME/STLE International Joint Tribology Conference 2010 (JTC 2010), San Francisco, California, USA

Aksoy, Serdar and Akşit, Mahmut Faruk (2010) Evaluation of pressure-stiffness coupling in brush seals. In: 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Nashville, Tennessee

Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Kerpiççi, Hüsnü (2010) Effect of R600a on tribological behavior of sintered steel under starved lubrication. Tribology International (Sp. Iss. SI), 43 (5-6). pp. 1054-1058. ISSN 0301-679X

Duran, Ertuğrul Tolga and Akşit, Mahmut Faruk (2010) Effect of shear heat on hydrodynamic lift of brush seals in oil sealing. In: STLE 65th STLE Annual Meeting & Exhibition, Las Vegas, Nevada

Akşit, Mahmut Faruk (2010) Seeking design solutions through decoupling problems – a global engineering example. ME Today: A Publication for Early Career Engineers, 11 .

Dal, Mehmet and Kaya, Alaattin Metin and Akşit, Mahmut Faruk and Yiğit, S. Kadri and Kandemir, İlyas and Yüksel, Ebubekir (2010) A hardware test setup for grid connected and island operation of micro hydro power generation systems. In: IEEE Energy Conference & Exhibition (ENERGYCON 2010), Manama, Bahrain

2009

Çetinsoy, Ertuğrul and Sırımoğlu, Efe and Öner, Kaan Taha and Hançer, Cevdet and Ayken, Taylan and Ünel, Mustafa and Akşit, Mahmut Faruk and Kandemir, İlyas and Gülez, Kayhan (2009) Design and production of a new prototype unmanned aerial vehicle SUAVI. (Accepted/In Press)

Öner, Kaan Taha and Çetinsoy, Ertuğrul and Sırımoğlu, Efe and Hançer, Cevdet and Ayken, Taylan and Ünel, Mustafa and Akşit, Mahmut Faruk and Gülez, Kayhan and Kandemir, İlyas (2009) Modeling and control of a new tilt-wing unmanned aerial vehicle SUAVI. (Accepted/In Press)

Aksoy, Serdar and Akşit, Mahmut Faruk and Duran, Ertuğrul Tolga (2009) Brush seal performance measurement system. In: ASME/STLE International Joint Tribology Conference (IJTC 2009), Memphis, Tennessee, USA

Öner, Kaan Taha and Çetinsoy, Ertuğrul and Sırımoğlu, Efe and Ayken, Taylan and Ünel, Mustafa and Akşit, Mahmut Faruk and Kandemir, İ. and Gülez, K. (2009) Döner-kanat mekanizmasına sahip yeni bir insansız hava aracının (SUAVİ) modellenmesi ve kontrolü. In: Otomatik Kontrol Ulusal Toplantısı 2009 (TOK'09), İstanbul, Türkiye

Çetinsoy, Ertuğrul and Sırımoğlu, Efe and Öner, Kaan Taha and Ayken, Taylan and Hançer, Cevdet and Ünel, Mustafa and Akşit, Mahmut Faruk and Kandemir, İ. and Gülez, K. (2009) Yeni bir insansız hava aracının (SUAVİ) prototip üretimi ve algılayıcı-eyleyici entegrasyonu. In: Otomatik Kontrol Ulusal Toplantısı 2009 (TOK'09), İstanbul, Türkiye

Aksoy, Serdar and Akcan, Caner and Akşit, Mahmut Faruk (2009) Leakage performance of a novel turbomachinery shaft seal. In: The World Congress on Power and Energy Engineering (WCPEE 09), Cairo, Egypt

Akşit, Mahmut Faruk and Kızıl, Hüseyin and Efeoğlu, İhsan and Sariibrahimoğlu, Kemal (2009) Wear performance of titanium and niobium added MOS2 coatings under isobutane exposure. In: ASME/STLE International Joint Tribology Conference (IJTC 2009), Memphis, Tennessee, USA

2008

Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Kerpicci, Hüsnü (2008) Tribological behavior of sintered steel under starved lubrication in R600A environment. In: 2nd International Conference on Advanced Tribology, iCAT 2008, Singapore

Akşit, Mahmut Faruk (2008) 3-D analysis of high density brush stiffness with friction-pressure coupling. In: VI. Türkiye Abaqus Kullanıcılar Toplantısı - TAKT 2008 , İstanbul

Öner, Kaan Taha and Çetinsoy, Ertuğrul and Ünel, Mustafa and Akşit, Mahmut Faruk and Kandemir, İlyas and Gülez, Kayhan (2008) Dynamic model and control of a new quadrotor unmanned aerial vehicle with tilt-wing mechanism. In: ICCARV 2008 : "International Conference on Control, Automation, Robotics and Vision", Paris, France

Baran, Eray Abdurrahman and Hançer, Cevdet and Çalıkoğlu, Egemen and Duman, Emre and Çetinsoy, Ertuğrul and Ünel, Mustafa and Akşit, Mahmut Faruk (2008) İnsansız hava araçları için test düzeneği tasarımı ve üretimi. In: Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı TOK'08, İstanbul, Türkiye

Öner, Kaan Taha and Çetinsoy, Ertuğrul and Ünel, Mustafa and Kandemir, İlyas and Akşit, Mahmut Faruk and Gülez, Kayhan (2008) Yeni bir insansız hava aracının (SUAVi) dikey uçuş kipi için dinamik modeli ve yörünge kontrolü. In: Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı TOK'08, İstanbul, Türkiye

Çetinsoy, Ertuğrul and Öner, Kaan Taha and Kandemir, İlyas and Akşit, Mahmut Faruk and Ünel, Mustafa and Gülez, Kayhan (2008) Yeni bir insansız hava aracının (SUAVi) mekanik ve aerodinamik tasarımı. In: Otomatik Kontrol Türk Milli Komitesi, Otomatik Kontrol Ulusal Toplantısı TOK'08, İstanbul, Türkiye

Sariibrahimoğlu, Kemal and Kızıl, Hüseyin and Akşit, Mahmut Faruk and Efeoğlu, İhsan and Birol, Feriha S. (2008) A study on wear rates of 100Cr6 steel running against sintered steel surfaces under dry and starved lubrication. In: The 47th Annual Conference of Metallurgists, COM 2008, Winnipeg, Manitoba, Canada

Duran, Ertuğrul Tolga and Akşit, Mahmut Faruk (2008) A study of brush seal oil pressure profile including temperature-viscosity effects. In: 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Hartford, CT, USA

Akcan, Caner and Akşit, Mahmut Faruk and Aksoy, Serdar and Yüksel, Ebubekir (2008) Response surface modeling of a small crossflow hydro turbine rotor. In: International Conference on Small Hydropower, Hidroenergia 2008: "On the Crossroads", Bled, Slovenia

2007

Akşit, Mahmut Faruk (2007) 3-D ANALYSIS OF A HIGH DENSITY BRUSH WITH FRICTIONAL CONTACT INTERACTIONS. In: V. Abaqus Türkiye Kullanıcılar Konferansı , Divan Oteli Istanbul (Accepted/In Press)

Akşit, Mahmut Faruk (2007) Proceedings for INGAS2007 2nd International Symposium and Exhibition on Natural Gas Operations. [Volumes Edited / Special Issues]

2006

Duran, Ertuğrul Tolga and Akşit, Mahmut Faruk and Doğu, Yahya (2006) Effect of shear heat on hydrodynamic lift of brush seals in oil sealing. (Submitted)

Akşit, Mahmut Faruk (2006) Turbomachinery clearance control. UNSPECIFIED AIAA Progress in Astronautics and Aeronautics. AIAA, Reston, VA. (Accepted/In Press)

Akşit, Mahmut Faruk and Çetinsoy, Ertuğrul and Kandemir, İIyas (2006) A study of brush seal oil lift through long bearing analysis. In: STLE/ASME International Joint Tribology Conference, San Antonio, TX, USA

Doğu, Yahya and Akşit, Mahmut Faruk (2006) Brush seal temperature distribution analysis. ASME Journal of Engineering for Gas Turbines and Power, 128 (3). pp. 599-609. ISSN 0742-4795

Duran, Ertuğrul Tolga and Akşit, Mahmut Faruk and Doğu, Yahya (2006) Effect of shear heat on hydrodynamic lift of brush seals in oil sealing. In: 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Sacramento, California

Doğu, Yahya and Akşit, Mahmut Faruk (2006) Effects of geometry on brush seal pressure and flow fields - Part I: Front plate configurations. Journal of Turbomachinery, 128 (2). pp. 367-378. ISSN 0889-504X

Doğu, Yahya and Akşit, Mahmut Faruk (2006) Effects of geometry on brush seal pressure and flow fields - Part II: Backing plate configurations. Journal of turbomachinery, 128 (2). pp. 379-389. ISSN 0889-504X

Akşit, Mahmut Faruk and Kandemir, İlyas and Doğu, Yahya and Kızıl, Hüseyin (2006) An investigation of pressure stiffness coupling in brush seals. In: Eleventh Int. Symp. on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu

2005

Akşit, Mahmut Faruk and Doğu, Yahya (2005) INGAS2005 uluslararası doğalgaz işletmeciliği ve teknik eğitim sempozyumu bildiriler kitabı. [Volumes Edited / Special Issues]

2004

Bhate, Nitin and Thermos, Anthony C. and Akşit, Mahmut Faruk and Demiroğlu, Mehmet and Kizil, Huseyin (2004) Non-metallic brush seals for gas turbine bearings. In: ASME Turbo Expo 2004:Power for Land, Sea, and Air, Vienna, Austria

2003

Yeşilyurt, Serhat and Göktuğ, Gökhan and Akşit, Mahmut Faruk (2003) Modeling and simulation of micro-optical switches for dynamic and static loading. In: IEEE Conference on Industrial Technology, ICIT 03, Maribor, Slovenia

This list was generated on Fri Nov 21 04:21:22 2014 EET.