title   
  

Creator/Author/Editor: Özlü, Emre

2013

Çakır, Esin and Karagüzel, Umut and Olgun, Utku and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan (2013) Dik kesme durumunda kesme sıcaklığının analitik modellenmesi ve deneysel olarak doğrulanması (Modeling of temperature distribution in orthogonal cutting and experimental verfication). In: 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Kusadasi, Turkey

Baytok, Esma and Tuna, Başak and Toprak, Ayhan and Özlü, Emre and Budak, Erhan (2013) Freze ve delik delme işlemlerinde kullanılan karbür takımların sistematik olarak performans karşılaştırması (Performance comparison of milling and drilling carbide tools). In: 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Kusadasi, Turkey

Çomak, Alptunç and Koca, Recep and Özlü, Emre and Özşahin, Orkun and Öztürk, Erdem and Tunç, Taner and Uysal, Emre and Budak, Erhan and Özgüven, H. Nevzat (2013) Talaşlı imalat süreçlerinin kararlılığı ve takım tezgah dinamiği (Machining process stability and machine tool dynamics). In: 16. Ulusal Makina Teorisi Sempozyumu (UMTS 2013), Erzurum, Turkey

2012

Özlü, Emre and Tunç, Lütfi Taner and Güven, İpek and Budak, Erhan (2012) Industrial applications of science integrated machining approach. In: 15. Uluslararası Makina Tasarım ve İmalat Kongresi (UMTİK 2012), Pamukkale, Denizli, Turkey

Çakır, Esin and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan (2012) Modeling of temperature distribution in orthogonal cutting with dual-zone contact at rake face. In: 1st International Conference on Virtual Machining Process Technology (VMPT), Montreal, Canada

2010

Akçay, Recep and Memiş, Emre K. and Özlü, Emre and Budak, Erhan (2010) Havacılık sanayinde süreç optimizasyonu için kararlılık diyagramlarının kullanımı. In: 2. Ulusal Talaşlı İmalat Sempozyumu (UTIS 2010), Konya, Türkiye

Özlü, Emre and Molinari, Alain and Budak, Erhan (2010) Two-zone analytical contact model applied to orthogonal cutting. Machining Science and Technology, 14 (3). pp. 323-343. ISSN 1091-0344 (print) 1532-2483 (online)

Akçay, Recep and Memiş, Emre K. and Özlü, Emre and Budak, Erhan (2010) Increasing productivity in high speed milling of airframe components using chatter stability diagrams. In: 2nd International CIRP Conference on Process Machine Interactions (PMI 2010), Vancouver, Canada

Özlü, Emre and Engin, Şerafettin and Cook, Cristina and El-Wardany, Tahany and Budak, Erhan (2010) Simulation of broaching operations for tool design optimization. In: 2nd International CIRP Conference on Process Machine Interactions (PMI 2010), Vancouver, Canada

2009

Özlü, Emre and Budak, Erhan and Molinari, A. (2009) Analytical and experimental investigation of rake contact and friction behavior in metal cutting. International Journal of Machine Tools and Manufacture, 49 (11). pp. 865-875. ISSN 0890-6955

Özlü, Emre and Budak, Erhan (2009) Process modeling of orthogonal cutting with hone radiused tools. In: 12th CIRP Conference on Modeling and Machining Operations, San Sebastion, Spain

2008

Aksu, Burak and Özlü, Emre and Budak, Erhan (2008) Analysis and modeling of edge forces in orthogonal cutting. In: International Conference on Manufacturing Engineering, Kassandra, Greece

Özlü, Emre (2008) Analytical modeling of cutting process mechanics and dynamics for simulation of industrial machining operations. [Thesis]

Budak, Erhan and Özlü, Emre (2008) Development of a thermomechanical cutting process model for machining process simulations. CIRP Annals - Manufacturing Technology, 57 (1). pp. 97-100. ISSN 0007-8506

2007

Özlü, Emre and Budak, Erhan (2007) Analytical modeling of chatter stability in turning and boring operations - part I: model development. Journal of Manufacturing Science and Engineering, 129 (4). pp. 726-732. ISSN 1087-1357

Özlü, Emre and Budak, Erhan (2007) Analytical modeling of chatter stability in turning and boring operations - Part II: Experimental verification. Journal of manufacturing science and engineering, 129 (4). pp. 733-739. ISSN 1087-1357

Öztürk, Erdem and Özlü, Emre and Budak, Erhan (2007) Modeling dynamics and stability of 5-axis milling processes. In: 10th CIRP INternational Workshop on Modeling of Machining OPerations, Calabria, Italy

Özlü, Emre and Budak, Erhan and Molinari, Alain (2007) Thermomechanical modeling of orthogonal cutting including the effect of stick-slide regions on the rake face. In: 10th CIRP INternational Workshop on Modeling of Machining OPerations, Calabria, Italy

Özlü, Emre and Budak, Erhan (2007) Experimental analysis and modeling of orthogonal cutting using material and friction models. In: 4th International Conference and Exhibition on Machines and Design and Production of Dies and Molds, Cesme, Izmir, Turkey

2006

Özlü, Emre and Budak, Erhan (2006) Analytical stability models for turning and boring operations. In: 2nd International Conference on High Speed Cutting, Vancouver, Canada

Özlü, Emre and Budak, Erhan (2006) Analytical prediction of stability limit in turning operations. In: CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia

Özlü, Emre and Budak, Erhan (2006) Tornalama işlemlerinde süreç kararlılığının analitik olarak modellenmesi. In: TİMAK Kongresi, Istanbul, Turkey

This list was generated on Tue Aug 19 17:56:09 2014 EEST.