title   
  

Faculty/Program: Integrated Manufacturing Technologies Research and Application Center

  • University Structure (9840)
    • Integrated Manufacturing Technologies Research and Application Center (70)
Number of items at this level: 70.

2019

Alcan, Gökhan and Ünel, Mustafa and Aran, Volkan and Yılmaz, Metin and Gürel, Çetin and Köprübaşı, Kerem (2019) Predicting NOx emissions in diesel engines via sigmoid NARX models using a new experiment design for combustion identification. Measurement, 137 . pp. 71-81. ISSN 0263-2241 (Print) 1873-412X (Online)

Alcan, Gökhan and Yılmaz, Emre and Ünel, Mustafa and Aran, Volkan and Yılmaz, Metin and Gürel, Çetin and Köprübaşı, Kerem (2019) Estimating soot emission in diesel engines using gated recurrent unit networks. IFAC-PapersOnLine, 52 (5). pp. 544-549. ISSN 2405-8963

Alkan Taş, Buket and Şehit, Ekin and Taş, Cüneyt Erdinç and Ünal, Serkan and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. and Ünal, Hayriye (2019) Carvacrol loaded halloysite coatings for antimicrobial food packaging applications. Food Packaging and Shelf Life, 20 . ISSN 2214-2894

Atahan, Ali Osman and Büyük, Murat and Örnek, Murat and Erdem, Musab and Turedi, Yakup (2019) Determination of optimum post embedment depth for C120 steel posts using field and full scale crash test. International Journal of Crashworthiness . ISSN 1358-8265 (Print) 1754-2111 (Online) Published Online First http://dx.doi.org/10.1080/13588265.2018.1479499

Avaz, Merve Senem and Taştan, Ömer Faruk and Taş, Cüneyt Erdinç and Ünal, Hayriye and İnce, İkbal Agah and Menceloğlu, Yusuf Z. (2019) Insecticide-releasing LLDPE films as greenhouse cover materials. Materials Today Communications, 19 . pp. 170-176. ISSN 2352-4928

Aydoğan, Eda and Martinez, Enrique and March, Katia and El-Atwani, Osman and Krumwiede, David and Hosemann, Peter and Saleh, Tarik and Maloy, Stuart (2019) Alpha ' formation kinetics and radiation induced segregation in neutron irradiated 14YWT nanostructured ferritic alloys. Scientific Reports, 9 . ISSN 2045-2322

Aydoğan, Eda and Rietema, Connor J. and Carvajal-Nunez, Ursula and Vogel, Sven C. and Li, Meimei and Maloy, Stuart A. (2019) Effect of high-density nanoparticles on recrystallization and texture evolution in ferritic alloys. Crystals, 9 (3). ISSN 2073-4352

Aydoğan, Eda and Weaver, J. S. and Carvajal-Nunez, U. and Schneider, M. M. and Gigax, J. G. and Krumwiede, D. L. and Hosemann, P. and Saleh, T. A. and Mara, N. A. and Hoelzer, D. T. and Hilton, B. and Maloy, S. A. (2019) Response of 14YWT alloys under neutron irradiation: A complementary study on microstructure and mechanical properties. Acta Materialia, 167 . pp. 181-196. ISSN 1359-6454 (Print) 1873-2453 (Online)

Çakal Saraç, Elçin and Haghighi Poudeh, Leila and Monfared Zanjani, Jamal Seyyed and Pehlivan, Zeki Semih and Cebeci, Fevzi Çakmak and Aydın, İsmail and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2019) Nano-engineering of high-performance PA6.6 nanocomposites by the integration of CVD-grown carbon fiber on graphene as a bicomponent reinforcement by melt-compounding. Journal of Applied Polymer Science . ISSN 0021-8995 (Print) 1097-4628 (Online) Published Online First http://dx.doi.org/10.1002/app.48347

Çakal Saraç, Elçin and Haghighi Poudeh, Leila and Seyyed Monfared Zanjani, Jamal and Letofsky-Papst, Ilse and Cebeci, Fevzi Çakmak and Aydın, İsmail and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2019) Performance comparison of CVD grown carbon nanofiber based on single- and multi-layer graphene oxides in melt-compounded PA6.6 nanocomposites. Open Journal of Composite Materials, 9 (2). pp. 99-123. ISSN 2164-5612 (Print) 2164-5655 (Online)

Çelik, Murat and Çiftçi, Cihan and Eskizeybek, Volkan and Şaş Çaycı, Hatice Sinem (2019) Numerical characterization of permeability tensor of fiber preforms for liquid composite molding applications. Advanced Science, Engineering and Medicine, 11 (7). pp. 633-636. ISSN 2164-6627 (Print) 2164-6635 (Online)

Daelemans, Lode and Kızıldağ, Nuray and Van Paepegem, Wim and D'hooge, Dagmar R. and De Clerck, Karen (2019) Interdiffusing core-shell nanofiber interleaved composites for excellent Mode I and Mode II delamination resistance. Composites Science and Technology, 175 . pp. 143-150. ISSN 0266-3538 (Print) 1879-1050 (Online)

Demircan, Özgür and Yılmaz, Çağatay and Kocaman, Esat Selim and Yıldız, Mehmet (2019) An experimental study on tensile and bending properties of biaxial warp knitted textile composites. Advanced Composite Materials . ISSN 0924-3046 (Print) 1568-5519 (Online) Published Online First http://dx.doi.org/10.1080/09243046.2019.1639016

Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet (2019) Experimental and numerical investigation on fracture behavior of glass/carbon fiber hybrid composites using acoustic emission method and refined zigzag theory. Composite Structures . ISSN 0263-8223 (Print) 1879-1085 (Online) Published Online First http://dx.doi.org/10.1016/j.compstruct.2019.110971

Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet (2019) Acoustic emission monitoring of glass/carbon hybrid fiber/epoxy composites under flexural and tensile loading conditions. In: 5th International Conference on Mechanics of Composites (MECHCOMP), Lisbon, Portugal

Evren Han, Sanem and Ünel, Mustafa (2019) An acceleration-based hybrid learning-adaptive controller for robot manipulators. Transactions of the Institute of Measurement and Control (SI), 41 (8). pp. 2114-2123. ISSN 0142-3312 (Print) 1477-0369 (Online)

Fatehi, R. and Rahmat, Amin and Tofighi, N. and Yıldız, Mehmet and Shadloo, M. S. (2019) Density-based smoothed particle hydrodynamics methods for incompressible flows. Computers and Fluids, 185 . pp. 22-33. ISSN 0045-7930 (Print) 1879-0747 (Online)

Gigax, Jonathan G. and Kim, Hyosim and Aydoğan, Eda and Price, L. M. and Wang, X. and Maloy, S. A. and Garner, F. A. and Shao, L. (2019) Impact of composition modification induced by ion beam Coulomb-drag effects on the nanoindentation hardness of HT9. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 444 . pp. 68-73. ISSN 0168-583X (Print) 1872-9584 (Online)

Gönül, Bora and Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2019) Improved stable conditions in robotic milling by kinematic redundancy. In: 17th CIRP Conference on Modelling of Machining Operations, Sheffield, UK

Haghighi Poudeh, Leila and Letofsky-Papst, Ilse and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Saner Okan, Burcu (2019) Facile synthesis of single- and multi-layer graphene/Mn3O4 integrated 3D urchin-shaped hybrid composite electrodes by core-shell electrospinning. ChemNanoMat, 5 (6). pp. 792-801. ISSN 2199-692X

Haghighi Poudeh, Leila and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2019) Three-dimensional graphene-based structures: production methods, properties, and applications. In: Celasco, Edvige and Chaika, Alexander N., (eds.) Handbook of Graphene: Growth, Synthesis, and Functionalization. Wiley-Scrivener, USA, pp. 359-387. ISBN 978-1-119-46855-4

Kefal, Adnan and Haşim, Kazım Ahmet and Yıldız, Mehmet (2019) A novel isogeometric beam element based on mixed form of refined zigzag theory for thick sandwich and multilayered composite beams. Composites Part B: Engineering, 167 . pp. 100-121. ISSN 1359-8368 (Print) 1879-1069 (Online)

Koç, Bahattin and Acar, Anıl Ahmet and Weightman, Andrew and Cooper, Glen and Blunn, Gordon and Bartolo, Paulo (2019) Biomanufacturing of customized modular scaffolds for critical bone defects. CIRP Annals - Manufacturing Technology, 68 (1). pp. 209-212. ISSN 0007-8506 (Print) 1726-0604 (Online)

Marques, Ricardo and Ünel, Mustafa and Yıldız, Mehmet and Suleman, Afzal (2019) Remaining useful life prediction of laminated composite materials using thermoelastic stress analysis. Composite Structures, 210 . pp. 381-390. ISSN 0263-8223 (Print) 1879-1085 (Online)

Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Topuz, Fuat and Afghah, Seyedeh Ferdows and Erman, Batu and Koç, Bahattin (2019) Nanocomposite bioinks based on agarose and 2D nanosilicates with tunable flow properties and bioactivity for 3D bioprinting. ACS Applied Bio Materials, 2 (2). pp. 796-806. ISSN 2576-6422

Nadernezhad, Ali and Ünal, Serkan and Khani, Navid and Koç, Bahattin (2019) Material extrusion-based additive manufacturing of structurally controlled poly(lactic acid)/carbon nanotube nanocomposites. International Journal of Advanced Manufacturing Technology (SI), 102 (5-8). pp. 2119-2132. ISSN 0268-3768 (Print) 1433-3015 (Online)

Oğuz, Oğuzhan and Candau, Nicolas and Çıtak, Mehmet Kerem and Çetin, Fatma Nalan and Seven, Merve Senem and Menceloğlu, Yusuf Z. (2019) A sustainable approach to produce stiff, super-tough, and heat-resistant poly(lactic acid)-based green materials. ACS Sustainable Chemistry and Engineering, 7 (8). pp. 7869-7877. ISSN 2168-0485

Ramezanzadeh, Shayan and Özbulut, M. and Yıldız, Mehmet (2019) Simulation of irregular wave motion using a flap-type wavemaker. In: VIII. International Conference on Computational Methods in Marine Engineering (MARINE 2019), Gothenburg, Sweden

Saffarimiandoab, Farzin and Yavuztürk Gül, Bahar and Erkoç İlter, Selda and Güçlü, Serkan and Ünal, Serkan and Tunaboylu, Bahadır and Menceloğlu, Yusuf Z. and Koyuncu, İsmail (2019) Evaluation of biofouling behavior of zwitterionic silane coated reverse osmosis membranes fouled by marine bacteria. Progress in Organic Coatings, 134 . pp. 303-311. ISSN 0300-9440

Seven, Merve Senem and Oğuz, Oğuzhan and Menceloğlu, Yusuf Z. and Atılgan, Canan (2019) Tuning interaction parameters of thermoplastic polyurethanes in a binary solvent to achieve precise control over microphase separation. Journal of Chemical Information and Modeling (SI), 59 (5). pp. 1946-1956. ISSN 1549-9596 (Print) 1549-960X (Online)

Seyyed Monfared Zanjani, Jamal and Oğuz, Oğuzhan and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2019) Polymer composites containing functionalized nanoparticles and the environment. In: Pielichowski, Krzysztof and Majka, Tomasz, (eds.) Polymer Composites with Functionalized Nanoparticles: Synthesis, Properties, and Applications. Elsevier, Amsterdam, pp. 437-466. ISBN 9780128140642

Sharabati, Jalal-Al-Din and Güçlü, Serkan and Erkoç İlter, Selda and İmer, Derya Y. and Ünal, Serkan and Menceloğlu, Yusuf Z. and Öztürk, İzzet and Koyuncu, İsmail (2019) Interfacially polymerized thin-film composite membranes: impact of support layer pore size on active layer polymerization and seawater desalination performance. Separation and Purification Technology, 212 . pp. 438-448. ISSN 1383-5866 (Print) 1873-3794 (Online)

Şaş Çaycı, Hatice Sinem and Simacek, Pavel and Advani, Suresh G. (2019) A methodology to characterize fiber preform permeability by using Kardar-Parisi-Zhang equation. Journal of Porous Media, 22 (7). pp. 799-811. ISSN 1091-028X (Print) 1934-0508 (Online)

Şen , Canhan and Aldulaimi , Wael and Mohammad Moradi, Omid and Mısırlıoğlu, Burç (2019) Loss of spin polarization in ferromagnet/ferroelectric tunnel junctions due to screening effects. Journal of Physics D: Applied Physics, 52 (1). ISSN 0022-3727 (Print) 1361-6463 (Online)

Tofighi, Nima and Özbulut, Murat and Suleman, A. and Feng, J. J. and Yıldız, Mehmet (2019) Dielectrophoretic interaction of circular particles in a uniform electric field. European Journal of Mechanics - B/Fluids . ISSN 0997-7546 (Print) 1873-7390 (Online) Published Online First http://dx.doi.org/10.1016/j.euromechflu.2019.07.002

Tunç, Lütfi Taner (2019) Effect of MQL conditions on tool life in milling of AISI 316L stainless steel. Journal of the Faculty of Engineering and Architecture of Gazi University, 34 (4). pp. 1665-1677. ISSN 1300-1884 (Print) 1304-4915 (Online)

Tunç, Lütfi Taner (2019) Smart tool path generation for 5-axis ball-end milling of sculptured surfaces using process models. Robotics and Computer Integrated Manufacturing, 56 . pp. 212-221. ISSN 0736-5845 (Print) 1879-2537 (Online)

Tunç, Lütfi Taner and Zatarain, Mikel (2019) Stability optimal selection of stock shape and tool axis in finishing of thin-wall parts. CIRP Annals - Manufacturing Technology, 68 (1). pp. 401-404. ISSN 0007-8506 (Print) 1726-0604 (Online)

Verl, Alexander and Valente, Anna and Melkote, Shreyes and Brecher, Christian and Öztürk, Erdem and Tunç, Lütfi Taner (2019) Robots in machining. CIRP Annals - Manufacturing Technology . ISSN 0007-8506 (Print) 1726-0604 (Online) Published Online First http://dx.doi.org/10.1016/j.cirp.2019.05.009

Yıldız, Mehmet and Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Haghighi Poudeh, Leila (2019) Experimental study on dynamic behavior of woven carbon fabric laminates using in-house piezoelectric sensors. (Accepted/In Press)

2018

Akdeniz Skvortsov, Gözde and Piluso, Susanna and Altunbek, Mine and Khani, Navid and Oosterwyck, Hans Van and Ferraris , Eleonora and Patterson, Jennifer and Koç, Bahattin (2018) 3D bioprinting of cell-laden molecularly engineered PEG-based hydrogels. In: Biofabrication Conference 2018, Wurzberg, Germany

Büyük, Murat and Atahan, Ali Osman and Kurucuoğlu, Kenan (2018) Impact performance evaluation of a crash cushion design using finite element simulation and full-scale crash testing. Safety, 4 (4). ISSN 2313-576X

Dayan, Cem Balda and Afghah, Seyedeh Ferdows and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Çulha, Mustafa and Koç, Bahattin (2018) Modeling 3D melt electrospinning writing by response surface methodology. Materials & Design, 148 . pp. 87-95. ISSN 0264-1275 (Print) 1873-4197 (Online)

Demir, Eralp and Mercan, Safiye Canset (2018) A physics-based single crystal plasticity model for crystal orientation and length scale dependence of machining response. International Journal of Machine Tools and Manufacture, 134 . pp. 25-41. ISSN 0890-6955 (Print) 1879-2170 (Online)

Güçlü, Serkan and Sharabati, Jalal-Al-Din and Saffarimiandoab, Farzin and Ağtaş, Meltem and İmer, Derya Y. and Paşaoğlu, Mehmet E. and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2018) Investigation of pilot scale manufacturing of polysulfone (PSf) membranes by wet phase inversion method. Desalination and Water Treatment, 131 . pp. 66-74. ISSN 1944-3994 (Print) 1944-3986 (Online)

Haghighi Poudeh, Leila and Çakıroğlu, Dilek and Cebeci, Fevzi Çakmak and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2018) Design of Pt-supported 1D and 3D multilayer graphene-based structural composite electrodes with controlled morphology by core-shell electrospinning/electrospraying. ACS Omega, 3 (6). pp. 6400-6410. ISSN 2470-1343

Kefal, Adnan and Haşim, Ahmet Kazım and Yıldız, Mehmet (2018) Isogeometric analysis of moderately thick composite beams and plates based on refined zigzag theory. In: 28th International Workshop on Computational Mechanics of Materials (IWCMM), Glasgow, UK

Kefal, Adnan and Mayang, Jimmy Bunga and Öterkuş, Erkan and Yıldız, Mehmet (2018) Three dimensional shape and stress monitoring of bulk carriers based on iFEM methodology. Ocean Engineering, 147 . pp. 256-267. ISSN 0029-8018

Kefal, Adnan and Sohouli, A. and Öterkuş, E. and Yıldız, Mehmet and Suleman, A. (2018) Topology optimization of cracked structures using peridynamics. In: 28th International Workshop on Computational Mechanics of Materials (IWCMM), Glasgow, UK

Madenci, Erdoğan and Kefal, Adnan and Dördüncü, Mehmet and Barut, Atila and Yıldız, Mehmet (2018) Isogeometric analysis using peridynamics and XFEM. In: 59th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Kissimmee, USA

Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Koç, Bahattin (2018) Nanocomposite hydrogels of agarose/nanosilicates for 3D bioprinting applications. In: Biofabrication Conference 2018, Wurzberg, Germany

Ormancı-Acar, Türkan and Çelebi, Ferda and Keskin, Başak and Mutlu-Salmanlı, Öykü and Agtas, Meltem and Turken, Türker and Tufani, Ali and İmer, Derya Y. and Özaydın İnce, Gözde and Uçar Demir, Tuğba and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2018) Fabrication and characterization of temperature and pH resistant thin film nanocomposite membranes embedded with halloysite nanotubes for dye rejection. Desalination, 429 . pp. 20-32. ISSN 0011-9164 (Print) 1873-4464 (Online)

Özcan, Yiğit and Tunç, Lütfi Taner (2018) Investigation of surface mophology and integrity in multi axis abrasive waterjet machining (AWJM). In: International Symposium on Machining, Antalya, Turkey

Rahmat, Amin and Yıldız, Mehmet (2018) A multiphase ISPH method for simulation of droplet coalescence and electro-coalescence. International Journal of Multiphase Flow, 105 . pp. 32-44. ISSN 0301-9322 (Print) 1879-3533 (Online)

Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2018) Kinematic based selection of the workpiece location in robotic milling. In: International Symposium on Machining, Antalya, Turkey

Sapmaz, Ömer Faruk and Tunç, Lütfi Taner (2018) Tool axis optimization for robotic 5-axis milling considering kinematics. In: 14th Conference on High Speed Machining Conference, San Sebastian (Accepted/In Press)

Seyyed Monfared Zanjani, Jamal and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2018) Manufacturing of electroactive morphing carbon fiber/glass fiber/epoxy composite: process and structural monitoring by FBG sensors. Thin-Walled Structures, 130 . pp. 458-466. ISSN 0263-8231 (Print) 1879-3223 (Online)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) Self-healing thermosetting composites: concepts, chemistry and future advances. In: Delville, Marie-Helene and Taubert, Andreas, (eds.) Hybrid Organic‐Inorganic Interfaces: Towards Advanced Functional Materials. Wiley, UK. ISBN 9783527342556 (Print) 9783527807130 (Online)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Pappas, Panagiotis-Nektarios and Galiotis, Costas and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) Tailoring viscoelastic response, self-heating and deicing properties of carbon-fiber reinforced epoxy composites by graphene modification. Composites Part A: Applied Science and Manufacturing, 106 . pp. 1-10. ISSN 1359-835X (Print) 1878-5840 (Online)

Shakoorioskooie, Mahdieh and Menceloğlu, Yusuf Z. and Ünal, Serkan and Hayat Soytaş, Serap (2018) Rapid microwave-assisted synthesis of platinum nanoparticles immobilized in electrospun carbon nanofibers for electrochemical catalysis. ACS Applied Nano Materials, 1 (11). pp. 6236-6246. ISSN 2574-0970

Sohouli, A. and Yıldız, Mehmet and Suleman, Afzal (2018) Cost analysis of variable stiffness composite structures with application to a wind turbine blade. Composite Structures, 203 . pp. 681-695. ISSN 0263-8223 (Print) 1879-1085 (Online)

Tunç, Lütfi Taner (2018) Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 1891-1909. ISSN 0268-3768 (Print) 1433-3015 (Online)

Tunç, Lütfi Taner and Özşahin, Orkun (2018) Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes. Advances in Manufacturing . ISSN 2095-3127 (Print) 2195-3597 (Online) Published Online First http://dx.doi.org/10.1007%2Fs40436-018-0233-x

Vrabic, Rok and Kozjek, Dominik and Öztürk, Erdem and Tunç, Lütfi Taner and Malus, Andreja and Butala, Peter (2018) Identification of the CIRP expertise network based on public data. In: 51st CIRP Conference on Manufacturing Systems, Stockholm, Sweden

Yılmaz, C. and Akalın, C. and Günal, I. and Çelik, H. and Büyük, M. and Suleman, A. and Yıldız, Mehmet (2018) Observation of damage accumulation under in-plane shear loading. In: Specialists' Meeting AVT-305 on Sensing Systems for Integrated Vehicle Health Management (IVHM) of Military Vehicles (NATO STO AVT-305), Athens, Greece

Zaki, Hammad and Ünel, Mustafa (2018) Control of a hovering quadrotor UAV subject to periodic disturbances. In: 6th International Conference on Control Engineering & Information Technology (CEIT), Istanbul, Turkey

2017

Kefal, Adnan and Yıldız, Mehmet (2017) Modeling of sensor placement strategy for shape sensing and structural health monitoring of a wing-shaped sandwich panel using inverse finite element method. Sensors, 17 (12). ISSN 1424-8220

Kefal, Adnan and Yıldız, Mehmet and Öterkuş, E. (2017) Structural health monitoring of a wing-shaped sandwich panel using iFEM-RZT methodology. In: 3rd Turkey-Japan Workshop (TJW) on Polymeric Composite Materials, Kyoto, Japan

Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2017) Design optimization of thin-walled composite structures based on material and fiber orientation. Composite Structures, 176 . pp. 1081-1095. ISSN 0263-8223 (Print) 1879-1085 (Online)

Tunç, Lütfi Taner and Sapmaz, Ömer Faruk (2017) Challenges for industrial robots towards milling applications. In: 8th International Symposium on Machining (UTIS 2017), Antalya, Turkey

This list was generated on Mon Dec 9 07:55:31 2019 +03.