Design of 90x8 ROIC with pixel level digital TDI implementation for scanning type LWIR FPAs
Ceylan, Ömer and Kayahan, Hüseyin and Yazıcı, Melik and Gürbüz, Yaşar (2013) Design of 90x8 ROIC with pixel level digital TDI implementation for scanning type LWIR FPAs. In: Conference on Infrared Technology and Applications XXXIX, Baltimore, MD
Full text not available from this repository.
Official URL: http://dx.doi.org/10.1117/12.2018554
Design of a 90x8 CMOS readout integrated circuit (ROIC) based on pixel level digital time delay integration (TDI) for scanning type LWIR focal plane arrays (FPAs) is presented. TDI is implemented on 8 pixels which improves the SNR of the system with a factor of root 8. Oversampling rate of 3 improves the spatial resolution of the system. TDI operation is realized with a novel under-pixel analog-to-digital converter, which improves the noise performance of ROIC with a lower quantization noise. Since analog signal is converted to digital domain in-pixel, non-uniformities and inaccuracies due to analog signal routing over large chip area is eliminated. Contributions of each pixel for proper TDI operation are added in summation counters, no op-amps are used for summation, hence power consumption of ROIC is lower than its analog counterparts. Due to lack of multiple capacitors or summation amplifiers, ROIC occupies smaller chip area compared to its analog counterparts. ROIC is also superior to its digital counterparts due to novel digital TDI implementation in terms of power consumption, noise and chip area. ROIC supports bi-directional scan, multiple gain settings, bypass operation, automatic gain adjustment, pixel select/deselect, and is programmable through serial or parallel interface. Input referred noise of ROIC is less than 750 rms electrons, while power consumption is less than 20mW. ROIC is designed to perform both in room and cryogenic temperatures.
Repository Staff Only: item control page