Boiling heat transfer enhancement in mini/microtubes via polyhydroxyethylmethacrylate (pHEMA) coatings on inner microtube walls at high mass fluxes
Kaya, Alihan and Demiryürek, Rıdvan and Armağan, Efe and Özaydın İnce, Gözde and Sezen, Meltem and Koşar, Ali (2013) Boiling heat transfer enhancement in mini/microtubes via polyhydroxyethylmethacrylate (pHEMA) coatings on inner microtube walls at high mass fluxes. Journal of Micromechanics and Microengineering, 23 (11). ISSN 0960-1317 (Print) 1361-6439 (Online)
This is the latest version of this item.
Full text not available from this repository.
Official URL: http://dx.doi.org/10.1088/0960-1317/23/11/115017
In this experimental study, flow boiling in mini/microtubes was investigated with surface enhancements provided by polyhydroxyethylmethacrylate (pHEMA) coatings (of ~30 nm thickness) on inner microtube walls. Flow boiling heat transfer experiments were conducted on microtubes (with inner diameters of 249 µm, 507 µm and 998 µm) having inner surfaces with pHEMA coatings, which increases heat transfer surface area, enable liquid replenishment upon bubble departure, provide additional nucleation sites, and serve for extending Critical Heat Flux (CHF) and enhancing boiling heat transfer. De-ionized water was utilized as the working fluid in this study. pHEMA nanofilms of thickness ~30 nm on the microtube walls were coated through initiated chemical vapor deposition (iCVD) technique. Experimental results obtained from coated microtubes were compared to their plain surface counterparts at two mass flux values (10,000 kg/m2s and 13,000 kg/m2s). In comparison to the plain surface microtubes, coated surfaces demonstrate an increase up to 24% and 109% in CHF and heat transfer coefficients, respectively. These promising results support the use of pHEMA coated microtubes/channels as a surface enhancement technique for microscale cooling applications.
Available Versions of this Item
Repository Staff Only: item control page